Avocent PS/2 IP user manual Special Mouse Driver, Windows XP Mouse Settings, Active Desktop

Page 22

8/16/32 PS/2 KVM over IP switch

While the PS/2 IP-KVM switch works with accelerated mice and is able to synchronize the local with the remote mouse pointer, there are the following limitations, which may prevent this synchronization from working properly:

Special Mouse Driver

There are mouse drivers which influence the synchronization process and lead to desynchronized mouse pointers. If this happens, make sure you do not use a special vendor-specific mouse driver on your host system

Windows XP Mouse Settings

Windows XP knows a setting named “ improve mouse acceleration ”, which has to be deactivated

Active Desktop

If the Active Desktop feature of Microsoft Windows is enabled do not use a plain background. Instead, use some kind of wallpaper. As an alternative, you could also disable the Active Desktop completely.

To check the settings, move the mouse pointer on your administration system to the upper left corner of the Remote Console. Move the mouse pointer slightly forth and back, then. This will synchronize the mouse. Once done, move the mouse pointer around and observe the behavior of your remote mouse in accordance to the local one. If the mouse desynchronizes quickly, one of the settings as mentioned above may not be correct.

4.1.3.5 Single and Double Mouse Mode

The information above applies to the Double Mouse Mode, where remote and local mouse pointers are visible and need to by synchronize. The PS/2 IP-KVM switch also features another mode, the Single Mouse Mode, where only the remote mouse pointer is visible. Activate this mode in the open Remote Console and click into the window area. The local mouse pointer will be hidden and the remote one can be controlled directly. To leave this mode, it is necessary to define a mouse hotkey in the Remote Console Settings Panel. Press this key to free the captured local mouse pointer.

4.1.3.6 Video Modes

The PS/2 IP-KVM switch recognizes a limited number of common video modes. When running X11 on the host system, please do not use any custom mode lines with special video modes. If you do, the PS/2 IP-KVM switch may not be able to detect them. We recommend using any of the standard VESA video modes, instead

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents PS/2 IP-KVM Switch USER’S Manual RevTable of Contents Menu Options Initial IP configuration Quick Installation GuideInstallation Video modesWeb interface Remote ConsoleDefault settings for all video modes or only the current one When the sever is dead When the server is up and runningIntroduction Features Package contents Model No port PS/2 IP-KVM switch Port PS/2 IP-KVM Switch Technical specifications Model NoPort Model No Ports PS/2 IP-KVM switch System requirement Model No Ports PS/2 IP-KVM switchCable diagrams PS/2 Cable AT to PS/2 keyboard adapter Optional VGA CablePS/2 to DB9 adapter Optional 16/32 PS/2 KVM over IP switch Operation Overview Hardware installationConnecting PS/2 IP-KVM switch to the host system StepLocal console Optional InternetConnecting the External Reset/Power Option Initial configuration via Dhcp server ConfigurationInitial Configuration PS/2 IP-KVM switch Setup ToolAuthentication PS/2 IP-KVM switch setup toolKeyboard, Mouse and Video configuration Initial configuration via serial consoleIP autoconfiguration IP addressHost system mouse settings 3.1 PS/2 IP-KVM switch keyboard settingsRemote Mouse Settings Auto mouse speed and mouse synchronizationSpecial Mouse Driver Windows XP Mouse SettingsSingle and Double Mouse Mode Active DesktopPrerequisites UsageTelnet Login into the PS/2 IP-KVM switch and logout Internet Explorer displaying the encryption key lengthNavigation MainLogout from the PS/2 IP-KVM switch Remote Console General descriptionMain Window Remote Console Control Bar16/32 PS/2 KVM over IP switch Monitor Only Exclusive AccessScaling Mouse Handling Local CursorVideo Settings Remote Console Options MenuCursorReset all Modes PhaseReset this Mode BrightnessUndo Changes Soft KeyboardRemote Console Status Line 14. Remote Console Confirmation DialogRemote Control KVM Console Menu OptionsTelnet Console 16/32 PS/2 KVM over IP switch Change Password Users And GroupsKVM Settings User Console15. User Console Settings Part 16/32 PS/2 KVM over IP switch Power Control 16. Power Control17. Keyboard and Mouse Settings Keyboard/Mouse18. Video Settings Video4Device Settings Network16/32 PS/2 KVM over IP switch Dynamic DNS 20. Dynamic DNS16/32 PS/2 KVM over IP switch Security 22. Device SecurityAnti Brute Force Setting Unblocking users Certificate24. SSL Certificate Upload Serial Port 25. Serial Port16/32 PS/2 KVM over IP switch Date And Time 27. Date and TimeEvent Log 29. Event LogDevice Information Board SummaryReset Functions 32. Event Log ListUpdate Firmware 33. Update FirmwareUnit Reset 34. Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Single port PS2 KVM over IP Key Codes Table B.1 Key Names Video Modes

PS/2 IP specifications

The Avocent PS/2 IP KVM (Keyboard, Video, Mouse) switch is a sophisticated solution designed to provide remote access and management capabilities for servers and devices located in data centers or remote locations. As IT environments grow increasingly complex, the need for seamless and efficient management tools becomes essential. The Avocent PS/2 IP addresses this need by integrating high-end features and technologies that streamline operation and enhance productivity.

One of the standout features of the Avocent PS/2 IP is its ability to facilitate secure, remote access to connected devices through an IP network. This enables administrators to control servers and troubleshoot issues from virtually anywhere, eliminating the need to be physically present in the server room. The system supports multiple simultaneous user sessions, allowing multiple administrators to connect and manage devices at the same time, which is crucial for teamwork in large IT environments.

In terms of security, the Avocent PS/2 IP employs robust authentication mechanisms, including user-level access control and encrypted remote sessions. This ensures that only authorized personnel can access sensitive systems, significantly reducing the risk of unauthorized access or data breaches.

The Avocent PS/2 IP is designed to support a wide range of operating systems and server hardware, making it an extremely versatile solution for diverse IT infrastructures. It is compatible with various PS/2 devices and incorporates advanced video quality technologies to deliver high-definition video output, ensuring that administrators receive a clear and accurate representation of the connected systems.

Additionally, the device features built-in monitoring and alerting capabilities. These functionalities allow IT teams to keep track of device status, receive notifications of potential issues, and proactively address problems before they escalate into major outages. The ease of integration with existing management software also enhances its effectiveness.

Another significant characteristic of the Avocent PS/2 IP is its scalability. Organizations can easily expand their KVM infrastructure as their needs grow, allowing for the addition of more servers or devices without requiring a complete system overhaul. This flexibility makes it a cost-effective choice for businesses aiming to future-proof their IT operations.

In conclusion, the Avocent PS/2 IP KVM switch combines advanced remote access capabilities, strong security features, and broad compatibility, making it an essential tool for efficient IT management in today’s fast-paced technological landscape. Its design focuses on enhancing productivity and minimizing downtime, proving beneficial for organizations seeking streamlined operations and superior control over their server environments.
Top Page Image Contents