Blade ICE BMD00178 manual Command Replacements, STP Edge and Link

BLADEOS 6.3 Application Guide

Command Replacements

STP Edge and Link

The following commands have been moved in the CLI:

Old CLI Path	New Path
/cfg/l2/stg <#>/port <#>/edge	/cfg/port <#>/stp/edge
/cfg/l2/stg <#>/port <#>/link	/cfg/port <#>/stp/link
/cfg/l2/mrst/cist/port <#>/edge	/cfg/port <#>/stp/edge
/cfg/l2/mrst/cist/port <#>/link	/cfg/port <#>/stp/link

The equivalent ISCLI config-if mode commands (under interface port <#>) have also been moved:

Old ISCLI Path	New Path
spanning-tree stp <#> edge	spanning-tree edge
spanning-tree stp <#> link	spanning-tree link-type
spanning-tree mstp cist edge	spanning-tree edge
spanning-tree mstp cist link-type	spanning-tree link-type

When the switch boots with BLADEOS 6.3 software, any prior configuration in the active configuration block will automatically be updated to use the new command paths.

BMD00178, April 2010 25