Blade ICE BMD00178 manual ## Switch baudrate to 115200 bps and press Enter

Page 11

BLADEOS 6.3 Application Guide

3.Boot the switch and access the Boot Management menu by pressing <Shift B> while the Memory Test is in progress and the dots are being displayed.

4.Select 3 for Xmodem download. When you see the following message, change the Serial Port characteristics to 115200 bps:

##Switch baudrate to 115200 bps and press ENTER ...

5.Press <Enter> to set the system into download accept mode. When the readiness meter displays (a series of “C” characters), start XModem on your terminal emulator.

6.Select the Boot Image to download. The XModem initiates the file transfer. When the download is complete, a message similar to the following is displayed:

yzModem - CRC mode, 62494(SOH)/0(STX)/0(CAN) packets, 6 retries

Extracting images ... Do *NOT* power cycle the switch.

** VMLINUX **
Un-Protected 10 sectors
Erasing Flash	done
Writing to Flash	done
Protected 10 sectors
** RAMDISK **
Un-Protected 44 sectors
Erasing Flash	done
Writing to Flash	done
Protected 44 sectors
** BOOT CODE **
Un-Protected 8 sectors
Erasing Flash	done
Writing to Flash	done
Protected 8 sectors

BMD00178, April 2010

11

Image 11

Contents Release Notes Bladeos 6.3 Application Guide Release Notes 10Gb Uplink ESM Faceplate Hardware SupportRecommended SFP+ transceiver Loading New Software to Your Switch Updating the Switch Software ImageUsing the Bladeos CLI Using the Iscli Using the BBI Recovering from a Failed Upgrade Using the Boot Management Menu## Switch baudrate to 115200 bps and press Enter ## Switch baudrate to 9600 bps and press ESC Stacking New and Updated FeaturesStacking Limitations VMready Vlan Maps OSPFv3 statistics menu OSPFv3Port Trunk Hashing Enhancements Active MultiPath ProtocolManagement Interface Connection SM IPv4 and IPv4 Configuration ExtensionsIgmp Group Capacity Management Module Supplemental InformationManagement Module/GbESM Connectivity Secure Shell SSH Trunk Group Configuration TipsSecure Management Network FTP/TFTP Directory Path Spanning Tree Configuration TipsSyslog Configuration Tip Internal Port AutonegotiationSTP Edge and Link Command ReplacementsBpdu Guard Igmp Relay Known IssuesSoftware Upgrade Issues Access Control ListsLinking at 10/100Mb Interoperability with Older HubsLink Aggregation Control Protocol Radius with SSHv2 Static MrouterQoS Metering QoS and TrunkingBrowser Based Interface Strong Password ExpirationTrunk and Link Loop Trunk TrafficDaylight Saving Time VCenter SynchronizationBladeos 6.3 Application Guide