BLADEOS 6.3 Application Guide
7.When you see the following message, change the Serial Port characteristics to 9600 bps:
##Switch baudrate to 9600 bps and press ESC ...
8.Press the Escape key (<Esc>) to
9.Select 3 to start a new XModem Download. When you see the following message, change the Serial Port characteristics to 115200 bps:
##Switch baudrate to 115200 bps and press ENTER ...
10.Press <Enter> to continue the download.
11.Select the OS Image to download. The XModem initiates the file transfer. When the download is complete, a message similar to the following is displayed:
yzModem - CRC mode, 27186(SOH)/0(STX)/0(CAN) packets, 6 retries
Extracting images ... Do *NOT* power cycle the switch.
**** Switch OS ****
Please choose the Switch OS Image to upgrade [12n] :
12.Select the image number to load the new image (1 or 2). It is recommended that you select 1. A message similar to the following is displayed:
Switch OS | Image | 1 ... |
| ||
27 | sectors |
| |||
Erasing | Flash | done | |||
Writing | to Flash | .............................. | done | ||
Protected | 27 | sectors |
| ||
|
|
|
|
|
|
13.When you see the following message, change the Serial Port characteristics to 9600 bps:
##Switch baudrate to 9600 bps and press ESC ...
14.Press the Escape key (<Esc>) to
15.Select 4 to exit and boot the new image.
12 | BMD00178, April 2010 |