Using this handbook, Safety, Contents

Using this handbook

This handbook has been designed to give you all the information you need to install, connect, set up and use the Arcam CD93 compact disc player. The CR-314 remote control handset supplied with this equipment is also described.

Safety

Safety guidelines are set out on the inside front cover of this handbook.

Many of these items are common sense precautions, but for your own safety, and to ensure that you do not damage the unit, we strongly recommend that you read them.

Digital to Analogue conversion

The CD93 incorporates the latest audio up-sampling technology to convert the 44.1kHz data from the CD up to 192kHz in

24-bit precision using the Analog Devices AD1896 sample rate converter.

The 192kHz audio data is converted into the analogue domain using four Wolfson Micro WM8740 24-bit stereo DACs. Left and right output channels are made using two stereo DAC chips per channel, both operating in dual mono configuration. The resulting four mono signals (two for each channel) are summed together to help improve dynamic range, linearity and therefore distortion.

Due to the higher sample rates, the digital filters roll off less aggressively than for standard DACs, and the analogue filters have a wider bandwidth resulting in less phase distortion, particularly for the higher frequencies.

Contents
Safety guidelines	2
Important safety instructions	2
Safety compliance	2
Using this handbook	3
Safety	3
Digital to Analogue conversion	3
Installation	4
Positioning the unit	4
Connecting to other equipment	4
CD93 back panel (part)	4
Connecting to a power supply	4
Using your CD player	5
CDs with text	5
Using the remote control	6
CR-314 Remote Control	6
Technical specification	7
Guarantee	8
On-line registration	8

CD93

English