Installation
Positioning the unit
Always place the CD player on a level, firm surface. Placing your player on a set of dedicated sorbothane isolation feet will isolate the unit from its surroundings as well as absorbing the vibrations created within the player itself. You will generally hear some sonic improvements, which makes this an extremely
Connecting to other equipment
Interconnect cables
Interconnecting cables are not supplied with this CD player. We recommend high quality cables as inferior quality cables will degrade the sound quality of your system. Please contact your Arcam dealer for details of suitable cables.
Audio outputs 4
Connect these to your amplifier’s CD or any other
The second set of sockets can be used to connect to a second amplifier set up for
Coaxial digital output 2
Use this socket if you are using a separate digital to analogue converter (DAC) or digital recorder. Connect to the DAC or recorder’s digital input using a suitable 75Ω screened cable.
CAUTION: Never connect the digital output socket to a conventional audio input.
Optical digital output 3
Use this socket if you are using a separate DAC or digital recorder with an optical connection. Connect using a suitable optical cable.
Remote input connection 5
It is not necessary to make any connection to this socket in normal use. This connection is for ease of installation to multi- room remote control systems and is suitable for modulated IR commands. Contact your
Connecting to a power supply
Wrong plug?
Check that the plug supplied with the unit fits your supply and that your mains supply voltage agrees with the voltage setting (230V) indicated on the rear panel of the unit.
If your mains supply voltage or mains plug is different, consult your Arcam dealer or Arcam Customer Support on +44 (0)1223 203203.
Mains lead
The appliance is normally supplied with a moulded mains plug already fitted to the lead. If for any reason the plug needs to be removed, it must be disposed of immediately and securely, as it is a potential shock hazard when inserted into the mains socket. Should you require a new mains lead, contact your Arcam dealer.
Plugging in
Push the plug (IEC line socket) of the power cable supplied with the unit into the socket 1 (marked POWER INLET) in the back of the unit. Make sure it is pushed in firmly.
Put the plug on the other end of the cable into your power supply socket and switch the socket on.
CD93 back panel (part)
230V
| DIGITAL OUTPUTS | |
POWER INLET | OPTICAL | |
|
| |
AUDIO OUTPUTS
L
| REMOTE |
R | IN |
|
12
CD93 | 1 | 2 3 4 | 5 |
|
|
|
4