Technical specification

Digital to Analogue conversion

High performance 192kHz 24-bit sample rate converter and multiple 24-bit digital to analogue conversion

Laser pick-up	3 beam
Laser wavelength	780nm
Numerical aperture	0.45
Signal to noise ratio	114dB
Harmonic distortion, 24-bit (1kHz)	<0.0008%*
Frequency response (±0.2dB)	0.15Hz–20kHz
Output level (0dB)	2.2Vrms
Output impedance	47Ω
Minimum recommended load	5kΩ

*Using 16-bit, triangular p.d.f. dithered data

Physical

Dimensions	W430 x D290 x H85mm
Weight	6.5kg nett/8.4kg packed
Power consumption	32VA maximum
Digital output connection	75Ω co-axial
	optical TOSLINK
Supplied accessories
	Mains lead
	CR-314 remote control
	2 x AAA batteries

E&OE

NOTE: All specification values are typical unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

Radio interference

The CD93 player is a digital audio device which has been designed to very high standards of electromagnetic compatibility.

Both CD players and DACs generate, and can radiate RF (radio frequency) energy. In some cases this can cause interference with FM and AM radio reception. If this is the case, keep the CD player and its connecting cables as far from the tuner and its aerials as possible. Connecting the CD player and the tuner to different mains sockets can also help to reduce interference.

EC COUNTRIES -– These products have been designed to comply with directive 89/336/EEC.

USA – These products comply with FCC requirements.

Laser radiation

If an Arcam CD player is operated whilst the outer casing is removed, invisible laser radiation could cause eye damage.

English

CD93