Using your CD player
COMPACT DISC PLAYER
CD93
24 BIT / 192 kHz UPSAMPLING TECHNOLOGY
LOAD | PLAY | STOP | PAUSE | TRACK | POWER |
English
2 | 3 4 5 | 6 | 7 | 1 |
POWER 1
Press this button to switch the CD player on and off. When first powered up with no CD installed the display shows:
--NO DISC--
LOAD 2
To install a CD, press LOAD (or OPEN on the remote control). The CD tray opens – it accepts 12cm and 8cm discs. Place the CD in the tray with the label facing uppermost. Press LOAD again (or press PLAY, or gently push the tray in 5mm) to close the tray. You will see the total number of tracks and total disc time, for example…
TRACK | INDEX | MIN SEC | 1 | 2 | 3 | 4 | 5 | |
8 | 1 | 52.19 | ||||||
6 | 7 | 8 |
|
|
SKIP TRACK 7
To start a CD with a track other than the first, press 
or 
to locate the desired track.
To select another track during play, press 
or 
. The track is played automatically after selection.
CDs with text
Load
You will see the total number of tracks and the total disc time with ‘CD TEXT’ illuminated in the display. The artist and album title scrolls across the display before returning to show the artist and total number of tracks.
TRACK INDEX | MIN SEC | 1 | 2 | 3 | 4 | 5 |
ANASTACIA |
| |||||
| 6 | 7 | 8 | 9 | 10 | |
|
| 11 12 |
|
|
| |
| CD TEXT |
|
|
|
|
|
Play
The display returns to ‘0’ after a few seconds. The disc is now ready to play.
The track number is briefly displayed, followed by the track title scrolling across the display. The display returns to showing the track number and time.
PLAY 3
Press to play the CD. To restart from track 1, press STOP and then PLAY.
Make sure your amplifier’s input source selector is set to the correct input.
Track selection
When a new track is selected, the track number is briefly displayed, followed by the track title scrolling across the display. The display returns to showing the track number and time.
STOP 4
Press to stop the CD playing. The display shows ‘0’ and the number of tracks.
PAUSE 5
Press to pause the disc (interrupt play). Press PLAY to resume play from the same point.
SEARCH 6
Press 
to search backwards, or 
to search forwards for a particular passage within the currently playing track. If the player is in ‘PAUSE’ mode the search is made at high speed with the sound muted.
Press 
, 
or PLAY to stop the search action and resume playing.
NOTE: The track title is always displayed when a track is selected, either for playing or programming.
The artist is always displayed when the disc is stopped. The TITLE button turns the text display off.
The text display supports English only.
CD93
5