AVE VSSI-PRO operation manual Text Display, Screen Blank

PROGRAMMING THE VSSI-PRO

When the desired time/date is displayed, press the “Up” and “Down” buttons simultaneously to enter the title into memory and return to the menu.

The white boxes will disappear and your title will be displayed as it will appear on-screen.

NOTE "

Remember, enabling the titler will limit text insertions to 10 lines maximum, and with the clock on then 9 maximum.

EXIT

Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.

TEXT DISPLAY

This menu will give you more control over the actual text block formatting and its appearance on-screen. On the main- menu, press the “Up” or “Down” button to move the cursor to “TEXT DISPLAY” and press “Set”. The following sub-menu will appear:

SCREEN BLANK	20
DISPLAY LINES	10
DISPLAY FORMAT	TOP
LINE COMPRESS	ON
LEFT JUSTIFIED	ON
SCROLL DELAY	ON
DISPLAY	ON
EXIT

Figure 26: TEXT DISPLAY Sub-Menu

SCREEN BLANK

Choices: NONE, 6, 12, 20, 30, 60, 120, 180, 300 (in seconds)

This is the amount of time that the VSSI-Pro text display will remain on-screen after a transaction before blanking itself off (not the video picture, just the ATM transaction data) until the next transaction.

Press the “Up” or “Down” button to move the cursor to “SCREEN BLANK” and press “Set”. The cursor will begin flashing. Press the “Up” or “Down” button to move the cursor to cycle through the selections. Press the “Up” or “Down” button to cycle through the values and press “Set” when the desired value is displayed.

NOTE "

Choosing “NONE” means no blanking. The VSSI-Pro will display the last transaction until a new transaction is performed and over-writes the previous transaction.

VSSI-Pro VIDEO SERIAL ATM INTERFACE

22