PROGRAMMING THE VSSI-PRO
DATA BITS
Choices : 7 or 8
Press the “Up” or “Down” button to move the cursor to “DATA BITS” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to toggle between values and press “Set” when the desired value is displayed.
In addition to each item in this
BISYNC
Press the “Up” or “Down” button to move the cursor to “BISYNC” and press “Set”. The following
ADDRESS SET UP | ANY |
DATA ENCODE | NRZ |
DATA CODING | ASCII |
EXIT |
|
Figure 31: BISYNC Sub-Menu
ADDRESS SETUP
Choices : ANY, 1 through 254
Press the “Up” or “Down” button to move the cursor to “ADDRESS SETUP” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to toggle between values and press “Set” when the desired value is dis- played.
DATA ENCODE
Choices : NRZ, NRZI, NRZID
Press the “Up” or “Down” button to move the cursor to “DATA ENCODE” and press “Set”. The cursor will start flash- ing. Press the “Up” or “Down” button to toggle between values and press “Set” when the desired value is displayed.
DATA CODING
Choices : ASCII or EBCDIC
Press the “Up” or “Down” button to move the cursor to “DATA ENCODE” and press “Set”. The cursor will start flash- ing. Press the “Up” or “Down” button to toggle between values and press “Set” when the desired value is displayed.
SDLC
Press the “Up” or “Down” button to move the cursor to “SDLC” and press “Set”. The following
ADDRESS SETUP | ANY |
DATA ENCODE | NRZ |
DATA CODING | ASCII |
BAUD RATE | 2400 |
EXIT |
|
Figure 32: SDLC Sub-Menu
27