AVE VSSI-PRO Async Bisync Sdlc Exit, Address Setup ANY Baud Rate, Parity None Data Bits Exit

PROGRAMMING THE VSSI-PRO

PORT A : B

Again, there is probably no need for you to access this menu as it should be used for testing purposes only. You should rely on the setting chosen in ATM SELECT, but we will provide a brief overview of this menu. Press the “Up” or “Down” button to move the cursor to “PORT A : B” and press “Set”. The following sub-menu will appear:

ASYNC

BISYNC

SDLC

EXIT

Figure 29: Port A : B Sub-Menu

ASYNC

Press the “Up” or “Down” button to move the cursor to “ASYNC” and press “Set”. The following sub-menu will appear:

ADDRESS SETUP	ANY
BAUD RATE	2400
PARITY	NONE
DATA BITS	8
EXIT

Figure 30: ASYNC Sub-Menu

ADDRESS SETUP

Choices: ANY, 1 through 254

Press the “Up” or “Down” button to move the cursor to “ADDRESS SETUP” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to toggle between values and press “Set” when the desired value is dis- played.

BAUD RATE

Choices: 1200, 2400, 4800, 9600, 14.4K, 19.2K, 28.8K, 38.4K, 57.6K, 115.2K

Press the “Up” or “Down” button to move the cursor to “BAUD RATE” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to cycle through the values and press “Set” when the desired value is displayed.

PARITY

Choices: NONE, EVEN, ODD

Press the “Up” or “Down” button to move the cursor to “PARITY” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to toggle between values and press “Set” when the desired value is displayed.

VSSI-Pro VIDEO SERIAL ATM INTERFACE

26