AVE TDCT-Pro operation manual Contents

Page 2

Contents

 

1. INTRODUCTION

3

2. FEATURES

3

3. PROGRAMMING

4

3.1 Front Control Panel

4

3.2 Main Programming Menu

6

3.3 Set Master / Slave

6

3.4 Time and Date

7

3.5 Set Time and Date

8

3.6 Reset Time and Date

8

3.7 Titler

8

3.8 Screen Setup

9

3.9 Communication

9

4. CABLES

10

APPENDIX

11

-TDCT-Pro Software

 

- RS-232 Command Set

 

CAUTION!

RISK OF ELECTRICAL SHOCK!

DO NOT OPEN!

TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER. DO NOT EXPOSE THE EQUIPMENT TO RAIN OR MOISTURE. NO USER SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING!

THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL MAY CAUSE INTERFERENCE TO RADIO COMMUNICA- TIONS. IT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A COMPUTING DEVICE PURSUANT TO SUBPART J OF PART 15 OF FCC RULES, WHICH ARE DESIGNED TO PROVIDE REASONABLE PRO- TECTION AGAINST SUCH INTERFERENCE WHEN OPERATED IN A COMMERCIAL ENVIROMENT. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE INTERFERENCE IN WHICH CASE THE USER AT HIS/ HER OWN EXPENSE WILL BE REQUIRED TO TAKE WHATEVER MEASURES MAY BE REQUIRED TO CORRECT THE INTERFERENCE.

Copyright C AVE Thailand Co., Ltd. 2000-2006

2

Image 2
Contents TDCT-Pro Time-Date-Character-Title Contents Introduction IntroductionProgramming Down Up Set Reset Changing the Gray scaleMain Programming Menu Set Master / SlaveTime & Date Set Time & DateReset Time & Date TitlerScreen Setup CommunicationPin Asignments and Connectors for RS-232 CableRS-485 Network TDCT-Pro SoftwareTDCT-Pro Windows Software Main Menu RS232 Command Protocol 1. Update TitlerMasterCommand TTAddressTitleCR Description Address 1 byteUpdate Hour Update MinuteUpdateYear Update MonthCommand Dxx Description Update DateUpdate TitlerSlave Command D05North America AVE USA