AVE TDCT-Pro operation manual Set Time & Date

Page 7

PROGRAMMING CONT.

By selecting the Set Address between 0 to 254 make TDCT-Pro to act as a slave and that make TDCT-Pro ready to receive command from the master. Selecting “ANY” will make TDCT-Pro as a stand-alone unit. Selecting “MSTR” make the TDCT-Pro to act as a master. TDCT-Pro can sense all the slaves by pressing the reset button and synchronize the time of slaves TDCT-Pros connected with it. Appendix 1 illustrates the connection informa- tion between master and salve.

3.4Time & Date

This programming feature can be use to format the time and date on display. Following menu is appears on the screen when “Time & Date” is selected from the main programming menu.

•Time Display

ON/OFF

•Date Display

LN1/LN2/OFF

•Counter

FIELD/T/10/OFF

•Time Format

12/24

•Date Format

(MM/DD/YY)/(DD/MM/YY)/(YY/MM/DD)

•DST

DISABLED/USA/CANADA/AUSTRALIA/TASMANIA

•Exit

 

3.5 Set Time & Date

Time and Date can manually set by selecting set time and date from the programming menu.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TDCT-Pro Time-Date-Character-Title Contents Introduction IntroductionProgramming Changing the Gray scale Down Up Set ResetSet Master / Slave Main Programming MenuSet Time & Date Time & DateTitler Reset Time & DateCommunication Screen SetupCable Pin Asignments and Connectors for RS-232TDCT-Pro Software RS-485 NetworkAddress 1 byte RS232 Command Protocol 1. Update TitlerMasterCommand TTAddressTitleCR Description TDCT-Pro Windows Software Main MenuUpdate Minute Update HourUpdate Month UpdateYearD05 Update DateUpdate TitlerSlave Command Command Dxx DescriptionNorth America AVE USA
Top Page Image Contents