AVE TDCT-Pro operation manual Reset Time & Date, Titler

Page 8

PROGRAMMING CONT.

Time Display can be programmed on or off by selecting ON or off. Date can be displayed in 1 line or, 2 lines or can be pro- grammed off by selecting Date display feature. If the counter is turned on then the date is automatically displayed in the 2nd line. The Counter can be programmed either as a field counter or as 1/10th of the second counter. Field counter counts the number of fields in a second (60 fields per second in NTSC or 50 fields per second in PAL). If 1/10th of second is selected, then its count from 0 to 10 in a second. Time format can be programmable as a 12-hour display or 24-hour or military time display. Date format is programmable to (mm/dd/yy), (dd/mm/yy), or (yy/mm/dd).

If Daylight savings selected then the time is automatically ad- vanced one hour in the Spring and automatically reversed in the Fall at the appropriate time for the selected country.

3.6 Reset Time & Date

Time and date can be set to the factory default by selecting the time and date from the programming.

3.7 Titler

Selecting titler in the programming menu displays the following

menu on the screen.

Title ON/OFF

Title

Exit

8

Image 8
Contents TDCT-Pro Time-Date-Character-Title Contents Introduction IntroductionProgramming Down Up Set Reset Changing the Gray scaleMain Programming Menu Set Master / SlaveTime & Date Set Time & DateReset Time & Date TitlerScreen Setup CommunicationPin Asignments and Connectors for RS-232 CableRS-485 Network TDCT-Pro SoftwareRS232 Command Protocol 1. Update TitlerMaster Command TTAddressTitleCR DescriptionTDCT-Pro Windows Software Main Menu Address 1 byteUpdate Hour Update MinuteUpdateYear Update MonthUpdate Date Update TitlerSlave CommandCommand Dxx Description D05North America AVE USA