4. Cables
4.1 Cable
User are able to program TDCT-Pro via RS232C by TDCT- Pro software for Windows. The cable is optional for this product. COM1 or COM2 (Newer computer required COM1 cable) cable are needed if RS-232 device is used to set the time and date and title of the TDCT-Pro See Appexdix for TDCT-Pro software and command set.
Figure 3: Back Pannel of TDCT-Pro
Pin Asignments and Connectors for RS-232
PC-Com1 | Master TDCT-Pro |
DB9 Female | DB9 Male |
Pin-5(Gnd)-------------------------------- | Pin-5(Gnd) |
Pin-3(Txd)-------------------------------- | Pin-2(Rxd) |
-------- | Pin-3(Txd) |
Slave TDCT-Pro
DB9 Male
-----------------Pin-5(Gnd)
---------Pin-2(Rxd)
Slave TDCT-Pro
DB9 Male
-----------------Pin-5(Gnd)
---------Pin-2(Rxd)
