Main Programming Menu, Set Master / Slave

PROGRAMMING CONT.

3.2Main Programming Menu

Following is a detailed description of the Menu selections and the programming capabilities of the TDCT-Pro.

•Set Master/ Save

•Time & Date

•Set Time & Date

•Reset Time & Date

•Titler

•Screen Setup

•Communication

•Help

Figure 3: TDCT-Pro main menu

Note: If a sub menu has an "EXIT" selection, always go there and press "SET". Pressing "RESET" at the main menu exits you from the program

3.3Set Master / Slave

This programming feature can be used to select the TDCT-Pro as a master or slave or a stand-alone unit. The Following menu appears when you select the Set Master Slave from the main menu.

•Set Address	MSTR/ANY/0..254
•Exit