Asante Technologies FS4004DS user manual Rack Mounting the FS4008DS, Friendly NET

Mounting Configurations

Rack Mounting the FS4008DS

The FS4008DS comes with a rack-mounting kit.

▲Important! The FS4004DS cannot be installed in an equipment rack.

The FS4008DS can be mounted in a standard 19-inch equipment rack. This rack can be placed in a wiring closet with other equipment.

To install the FS4008DS in an equipment rack:

1 Attach the two mounting brackets (supplied) on

each side of the FS4008DS. See Figure 2-6.

									F
Power	1	2	3	4	5	6	7	8	8-RIENDLYNET
								100Mbps	port Dual Speed	Ethernet Switch
								Link/Act	Uplink	or	1	2	3
														4	5	6
								FDX / Col									7	8

Switched 10/100Mbps Ports

FS4008DS

Figure 2-6 Attaching mounting brackets to the FS4008DS

2 Mount the FS4008DS in the equipment rack by screwing the mounting brackets to the equipment rack. See Figure 2-7.

	1	2	3	4	5				FRIENDLY		NET
Power						6	7	8	8-port
								100Mbps		Dual Speed Ethernet				Switch						FS4008DS
										Uplink		or	1
								Link/Act						2	3	4
																	5	6
								FDX / Col											7	8

Switched 10/100Mbps Ports

Figure 2-7 Mounting the FS4008DS in an equipment rack

The FS4008DS rack mounting is complete. The FS4008DS is ready for network connections.

Page 2-7