Asante Technologies FS4008DS, FS4004DS LED Indicators for Port Connections, Off, Blinking

LED Indicators for Port Connections

LED Indicators for Port Connections

Link/Activity LED

The green Link/Activity LED indicates if there is a device detected on the other end of the port and if there is traffic on the port.

Table 3-1 describes the possible status indications of the Link/Activity LEDs.

Table 3-1 Link/Activity LED status indicators

State	Status
On	Normal data/link pulse reception
Off	No twisted-pair cable connected
	Link pulse disabled at other end
	No power to the switch, twisted-pair connection
	faulty
	Non-100Base-TX device at other end
	Twisted-pair cable exceeds recommended length
Blinking	Receiving network traffic

100Mbps Operation LED

The 100Mbps Operation LED indicates if a 10Mbps or a 100Mbps device is connected to the port.

Table 3-2 describes the possible status indications of the 100Mbps Operation LED

Table 3-2 100Mpbs LED status indicators

State	Status
On	A 100Mbps device is connected to a port or the
	uplink port
Off	A 10Mbps device is connected to a port or the
	uplink port

Page 3-3