Asante Technologies FS4008DS user manual LED Indicators for Power Connections, FS4004DS LEDs

LED Indicators

The front-panel LEDs for the FS4004DS and the FS4008DS are shown in Figure 3-1 and Figure 3-2, respectively.

FRIENDLYNET

4-port Dual Speed Ethernet Switch

1 2 3 4

100Mbps

Link/Act

Power FDX /Col

Power

Figure 3-1 FS4004DS LEDs

Power

100Mbps

Link/Activity

Full Duplex/

Collision

	1	2	3	4	5	6	7	8
Power									100Mbps

Link/Act

FDX / Col

100Mbps

Link/Activity

Full Duplex/ Collision

Figure 3-2 FS4008DS LEDs

LED Indicators for Power Connections

After the Switch is turned on, the LED indicators should respond as follows:

❏All LED indicators blink momentarily. This represents a reset of the system.

❏The FDX/Col LED indicators blink from yellow to green.

❏The power LED indicator lights and remains ON. If this indicator is not lit, check to make sure that the AC power connector is properly connected in the socket and that the power switch is ON.

Page 3-2