Asante Technologies FH100TX8, FH100TX16 user manual Multiple Hub and Station Configuration

Page 10

FriendlyNet Fast Ethernet Hub User’s Manual

Multiple Hub and Station Configuration

To connect two FriendlyNet Hubs and multiple Fast Ethernet network stations, follow the guidelines and diagram below.

Important: Your Fast Ethernet network configuration must comply with the IEEE 802.3u standard.

The maximum number of 100Base-TX hubs between any two net- work stations is TWO.

The maximum cable distance between any two stations on the network is 205 meters.

Figure 2-4 Connecting two hubs and multiple network stations

Page 2-5

Image 10
Contents FriendlyNet User’s ManualCopyright Notice Table of Contents Introduction FriendlyNet FH100TX8 and FH100TX16Package Contents FeaturesNetwork Reliability Installation Planning 100Base-TX Networks Cabling Requirements Voltage RequirementsConnecting Network Devices 100Base-TX Station to Hub ConnectionHub to Hub Connection Cascading Hubs SimultaneouslyConnecting two hubs and multiple network stations Multiple Hub and Station ConfigurationEquipment Rack Placement Mounting the FriendlyNet HubLED Indicators FriendlyNet FH100TX8 Fast Ethernet Hub LEDsLink/Receive PowerPartition UtilizationTroubleshooting Monitoring LEDsTroubleshooting Problem Action Technical Specifications FH100TX8 and FH100TX16 Fast Ethernet HubEnvironment Technical Support Contacting Technical SupportAsanté TECHNOLOGIES, INC., 821 FOX LANE, SAN JOSE, CA