Emulex 355 Connecting to the Web Manager, Web Manager Overview, To connect to the Web Manager

EMULEX MODEL 355 SAN STORAGE SWITCH	CHAPTER 3: SWITCH MANAGEMENT
USER’S GUIDE

Connecting to the Web Manager

The Web Manager displays current port utilization and health, enables easy to use Port Smart Settings and One-Step Zoning, and several additional features discussed later in this chapter.

Note: The Web Manager supports Microsoft Internet Explorer for Windows version 5.5 or later and Internet Explorer for Apple version 5.2 or later.

To connect to the Web Manager:

1.Ensure that the workstation has access to the network on which the switch is connected.

2.Open Microsoft Internet Explorer.

3.In the address bar, type the switch’s DNS name or IP address and press ENTER.

Web Manager Overview

The Web Manager enables users to view and configure switch and port settings using an intuitive, graphical user interface. The main page is the Switch Information page. This page displays general switch status and continually refreshes to display the most current switch status. For more information on the Switch Information page, see “Switch Information” on page 45

To return to this page at any time, click the Storage Switch menu item.

Command buttons

Navigation

Menu

Current page information

Figure 3-1: Web Manager interface

Note: The Web browser’s appearance and information depends on the switch’s active firmware version and may change without notice in subsequent firmware versions.

The Web Manager interface consists of a series of command buttons, an expandable navigation menu, and the displayed information area. The command buttons and navigation menu are always present on the page.

Command Button	Description
Submit	Saves any changes made to the switch configuration. This button is
	disabled until a configuration setting is changed or new information is
	entered. This button appears green to notify the user of a change to the
	switch configuration. Click this button to accept the configuration change.
Cancel	Cancels a request. This button is disabled until a configuration setting is
	changed or new information is entered. This button appears green to
	notify the user of a change to the switch configuration. Click this button to
	cancel the configuration change.
	EMULEX CORPORATION	13
	PART NUMBER 00041407-002 REV. B