Emulex 355 manual Adjusting the Switch Thresholds, Switch Thresholds page appears

EMULEX MODEL 355 SAN STORAGE SWITCH	CHAPTER 3: SWITCH MANAGEMENT
USER’S GUIDE

Adjusting the Switch Thresholds

The Switch Thresholds page displays a variety of switch threshold settings.

Setting	Description
Ordered Set Error Threshold	The maximum number of OS errors allowed in a 10-second interval
	before a port is bypassed. Setting this value to "0" returns it to the
	factory default setting.
	This setting is activated on the Port Smart Settings page.
CRC Error Threshold	The maximum number of CRC errors allowed in a 10-second
	interval before a port is bypassed. Setting this value to "0" returns it
	to the factory default setting.
	This setting is activated on the Port Smart Settings page.
Bad Zone Recovery Hold Time	The amount of time that the switch keeps the ports in bypass mode
(measured in centi-seconds)	before attempting to re-insert the ports into the zone.
	This setting is activated on the Advanced Functions One-Step
	Zoning page.
Bad Zone Recovery Delay Time	The amount of time that the switch waits after a zone goes down
(measured in seconds)	before attempting to recover the zone.
	This setting is activated on the Advanced Functions One-Step
	Zoning page.
Port Utilization Interval	The length of time between readings of the current port’s
(measured in seconds)	utilization.

To view the current threshold settings:

Click Advanced Functions > Thresholds > Switch.

The Switch Thresholds page appears.

Figure 3-7: Switch Thresholds page

To change switch thresholds or time intervals:

1.Enter the new value in the appropriate text box. The valid range is displayed next to the text box.

2.Click Submit.

The new value is set.

EMULEX CORPORATION 24

PART NUMBER 00041407-002 REV. B