Emulex 355 manual Switch Specifications, Operating Conditions

EMULEX MODEL 355 SAN STORAGE SWITCH

USER’S GUIDE			APPENDIX A: SPECIFICATIONS
APPENDIX A		Specifications
SWITCH SPECIFICATIONS
	Number of Ports		12
	Operating Rate		All ports operate at 1.0625 or 2.125 Gbps (selectable)
	Port Media Type		SFP
	Enclosure		1U half-rack form-factor
	Management Interface		RS-232 or 10/100 Ethernet
	Operating Mode		Switching or Non-switching modes
	Configurability		Management interface configurable
	Power On Selftest (POST)		Yes
	Dimensions		8.50 x 1.57 x 16.00 (W x H x D)
	AC Power Input		50 or 60 Hz / 100 – 250 VAC / 0.6 – 0.4 A
	AC Power Connector		IEC connector
	Weight		Approximately 7 lbs.

OPERATING CONDITIONS

The switch must be operated in a clean, dry environment with unrestricted airflow. Air flows in through the cosmetic end and out through the business end (sometimes called the transceiver end or “back-of-box”).

To avoid overheating, maintain a minimum clearance of two inches (50.8 millimeters) on each end of the switch (the cosmetic end and the business end). Allow an adequate amount of space on the top and sides of the switch for proper air ventilation. Do not place the switch on heat-generating surfaces. Operating conditions are listed below.

Requirement	Value
Operating Temperature	0°C to 40°C normal operation (ambient air temperature)
Storage	-40°C to 80°C non-condensing
Power	50 or 60 Hz / 100 – 250 VAC / 0.6 – 0.4 A

EMULEX CORPORATION 59

PART NUMBER 00041407-002 REV. B