Asante Technologies FH100TX16, FH100TX8 user manual Power, Partition, Link/Receive, Utilization

Page 13

LED Indicators

Power

The gr eenPWR (power) LED on the hub’s front panel illuminates when the hub is turned on and receiving power.

Partition

The yellow Partition LEDs, associated with each port, illuminate if a port has been partitioned.

A port will automatically disconnect a segment if there are excessive collisions (two or more stations on the network attempt to transmit packets simulta- neously). The segment will be reconnected when the collisions have subsided.

ΔNote: Collisions are normal in Fast Ethernet networks. Excessive collisions may indicate that your network is congested.

Refer to Appendix A, “Troubleshooting” for help with deter- mining problems on your network by monitoring the Collision LED.

Link/Receive

The gr eenLink/Receive LEDs, associated with each port, illuminate if there is a device detected on the other end and if there is traffic on the port.

The table below describes the possible status indications of the Link/Receive LEDs.

Table 3-1 Link/Receive LEDs

On

Normal data/link pulse reception

 

 

 

 

No twisted-pair cable connected

Off

Link pulse disabled at other end

 

 

No power to the hub

 

Twisted-pair connection faulty

 

Non-100Base-TX device at other end

 

Twisted-pair cable exceeds recommended

 

 

length

 

 

 

Blinking

Receiving network traffic

 

 

 

Utilization

The gr eenUtilization LEDs illuminate when there is activity on the network.

The amount of activity determines the percentage level of network utilization.

Page 3-2

Image 13
Contents User’s Manual FriendlyNetCopyright Notice Table of Contents FriendlyNet FH100TX8 and FH100TX16 IntroductionPackage Contents FeaturesNetwork Reliability Planning 100Base-TX Networks InstallationVoltage Requirements Cabling Requirements100Base-TX Station to Hub Connection Connecting Network DevicesSimultaneously Hub to Hub Connection Cascading HubsMultiple Hub and Station Configuration Connecting two hubs and multiple network stationsMounting the FriendlyNet Hub Equipment Rack PlacementFriendlyNet FH100TX8 Fast Ethernet Hub LEDs LED IndicatorsPartition PowerLink/Receive UtilizationMonitoring LEDs TroubleshootingTroubleshooting Problem Action FH100TX8 and FH100TX16 Fast Ethernet Hub Technical SpecificationsEnvironment Contacting Technical Support Technical SupportAsanté TECHNOLOGIES, INC., 821 FOX LANE, SAN JOSE, CA

FH100TX16, FH100TX8 specifications

Asante Technologies has made a name for itself in the networking equipment sector, especially with the introduction of its FH100TX8 and FH100TX16 series. These products are designed to cater to businesses looking for a reliable and efficient solution for their networking needs.

The FH100TX8 is an 8-port Fast Ethernet switch, while the FH100TX16 offers 16 ports. Both models enable seamless network connectivity and facilitate the management of devices within local area networks (LANs). One of the standout features of the FH100TX series is its support for auto-negotiation, allowing the switch to automatically detect the speed and duplex mode of connected devices. This ensures compatibility with a wide range of network devices, including older hardware, making it an ideal choice for mixed-technology environments.

Both the FH100TX8 and FH100TX16 are engineered with a focus on reliability and performance. The switches come with store-and-forward architecture, which prevents errors from propagating through the network by checking the integrity of incoming data packets. This characteristic not only enhances the overall efficiency of the network but also reduces the chances of network congestion and frame loss.

Another significant technology featured in these switches is their support for Quality of Service (QoS). With QoS capabilities, the FH100TX series ensures that critical network traffic, such as voice over IP or video streaming, is prioritized. This feature is essential for organizations that rely on real-time applications, as it ensures a smooth and uninterrupted user experience.

The design of these switches emphasizes ease of use and management. The plug-and-play functionality allows for quick setup and integration into existing network infrastructures without the need for complex configuration. Additionally, status LEDs on the front panel provide immediate feedback on port status and network activity, facilitating easier monitoring for IT administrators.

Power efficiency is another noteworthy characteristic of the FH100TX series. These switches are designed to minimize energy consumption without compromising performance. Many organizations today prioritize green technologies, making the power-saving features of the FH100TX appealing.

In conclusion, Asante Technologies’ FH100TX8 and FH100TX16 models deliver a robust and scalable networking solution tailored for various business needs. With their focus on reliability, performance, and ease of management, these switches are well-suited for enterprises looking to enhance their network infrastructure while ensuring optimal performance for critical applications. Their thoughtful design and advanced technologies make them a prudent investment for businesses aiming to streamline their communications and operations.