5.0 SAFETY
Condensate
drain.
Electrical power inlet.
WARNING
Hazardous voltage. Can cause severe injury or death.
Disconnect power before servicing.
Lockout/Tagout machine.
To obtain satisfactory compressor operation and maintenance, a minimum of 3 feet clearance on 3 sides is required. 3 1/2 feet is required in front of the control panel (or minimum required by latest National Electrical code or applicable local codes.)
Refer to the Instruction / Operators Manual before performing any maintenance.
Use 75˚C copper wire only.
Nur 75˚C kupferdraht verwenden. Utilisez 75˚C uniquement fil de cuivre. Usar solamente cable de cobre para 75˚ C. usare 75˚C solamente cavi di rame.
Use somente fio de cobre de 75˚.
39492384 Rev. 03
Use 75°C copper wire only.
IMPORTANT
Before starting this air compressor unit the shipping brace(s) must be removed. Save the brace(s) for future use. Refer to Operators/Instruction Manual.
39481130 Rev. 02
IMPORTANT
Before starting this air compressor unit the shipping brace(s) must be removed.
Save the brace(s) for future use.
Refer to Operators / Instruction Manual.
12IRN37 - 160K - CC & IRN50 - 200H
