8.0GENERAL INFORMATION

8.2INSTALLATION DRAWING − N55/75K−CC & N75/100H−CC − Air Cooled

KEY

A2” NPT Air discharge (Female) 60Hz units 2” BSP Air discharge (Female) 50Hz units

BØ63mm (2.48”) Electrical inlet

C0.38“ NPT (Female)

Note: Pipe condensate drain lines separately to an open drain due to differences in drain pressures. Use drain lines at least as large as the connection. Read operations manual and check local regulations

DCooling airflow

EExhaust airflow

FCabinet cooling airflow

G4 x Ø 13.0mm (0,5”)

Compressor should be bolted to the floor with four M10 (0.38”) bolts using holes shown. Seal base to floor with cork or rubber.

HINTELLISYS Controller

URight

VBottom

WFront

X−X Section through X−X

YRear view

ZPlan view

IRN37 - 160K - CC & IRN50 - 200H & IRN75 - 160K - 2S & IRN - 100 - 200H - 2S & IRN 250 - 300H - 2S

35

http://air.irco.com

 

Page 37
Image 37
Ingersoll-Rand IRN50-200H-CC, IRN37-160K-CC, IRN250-300H-2S Installation Drawing − N55/75K−CC & N75/100H−CC − Air Cooled