2.0 FOREWORD
Machine models represented in this manual may be used in various locations worldwide. Machines sold and shipped into European community countries requiresthat the machine display the EC Mark and conform tovarious directives. In such cases, the design specification of
this machine has been certified ascomplying with EC directives. Any modification to any part is absolutely prohibited and would result in the CEcertification and marking being rendered invalid.
The contents of this manual are considered to be proprietary and confidential to Ingersoll Rand and should not be reproduced without the prior written permission of Ingersoll Rand.
Nothing contained in this document is intended to extend any promise, warranty or representation,expressed or implied, regarding the Ingersoll Rand products described herein. Any such warranties or other terms and conditions of sale of products shall be in accordance with the standard terms and conditions of sale for such products, which are available upon request.
This manual contains instructions and technical data to cover all routine operation and scheduled maintenance tasks by operation and maintenance staff.
Majoroverhauls are outside the scope of this manual and should be referred to an authorized Ingersoll Rand service department.
All components, accessories, pipes and connectors added to the compressed air system should be:
•of good quality, procured from a reputable manufac- turer and, wherever possible, be of a type approved by Ingersoll Rand.
•clearly rated for a pressure at least equal to the ma- chine maximum allowable working pressure.
•compatible with the compressor lubricant/coolant.
•accompanied with instructions for safe installation,operation and maintenance.
Ingersoll Rand reserves the right to make changes and improvements to products without notice and without incurring any obligation to make such changes or add such improvements to products sold previously.
Details of approved equipment are available from Ingersoll Rand Service departments.
This machine has been designed and supplied for use only in the following specified conditions and applications:
•Compression of normal ambient air containing no known or detectable additional gases, vapors or particles
•Operation within the ambient temperature range specified in the GENERAL INFORMATION section of this manual.
IF IN DOUBT CONSULT SUPERVISION.
The company accepts no responsibility for errors in translation of this manual from the original English version.
The design of this Compressor package and certain features within it are covered by patents held by Ingersoll Rand and patents pending
SSR ULTRA COOLANT is a registered trademark of Ingersoll Rand Company USA.
INTELLISYS is a registered trademark of Ingersoll Rand Company USA.
HPM™, HYBRID PERMANENT MAGNET™ and HPM Logo are trade marks registered by MOTEURS
SOMER
© COPYRIGHT 2007 INGERSOLL RAND COMPANY
IRN37 - 160K - CC & IRN50 - 200H
http://air.irco.com
