5.0 SAFETY
Depending on point of manufacture and point of use, the compressor and this manual will show symbols from the following sections. Compressors for use within the European Community must be equipped with symbols from section
5.4.Read and understand thoroughly. Heed warnings and follow instructions. If you do not understand, inform your supervisor.
5.3TEXT DECALS
To obtain satisfactory compressor operation and maintenance, a minimum of 3 feet clearance on 3 sides is required. 3 1/2 feet is required in front of the control panel (or minimum required by latest National Electrical code or applicable local codes.)
Refer to the Instruction / Operators Manual before performing any maintenance.
DANGER
Discharge air.
Can contain carbon monoxide or other contaminants. Will cause severe injury or death.
Do not breathe this air.
WARNING
Hazardous voltage. Can cause severe injury or death.
Disconnect power before servicing.
Lockout/Tagout machine.
WARNING
Rotating fan blade. Can cause severe injury.
Do not operate with covers removed.
Disconnect power. Lock/out and tag out machine.
IRN37 - 160K - CC & IRN50 - 200H & IRN75 - 160K - 2S & IRN - 100 - 200H - 2S & IRN 250 - 300H - 2S | ||
http://air.irco.com | ||
|
