8.0GENERAL INFORMATION
8.2INSTALLATION DRAWING − N250/300H TWO STAGE
KEY
A4” NPT Air discharge (Female)
BElectrical inlet − Ø75mm (3”)
C0.50“ NPT (Female)
Note: Pipe condensate drain lines separately to an open drain due to differences in drain pressures. Use drain lines at least as large as the connection. Read operations manual and check local regulations
DCooling airflow
EExhaust airflow
FCabinet cooling airflow
G4 x Ø 14.2mm (0,6”)
Compressor should be bolted to the floor with four M12 (0.5”) bolts using holes shown. Seal base to floor with cork or rubber.
HINTELLISYS Controller
URight
VBottom
WFront
XLeft view
YRear view
ZPlan view
IRN37 - 160K - CC & IRN50 - 200H & IRN75 - 160K - 2S & IRN - 100 - 200H - 2S & IRN 250 - 300H - 2S | 41 |
http://air.irco.com |
|
