Asante Technologies 10BaseT, 10BaseFL manual Switches for 10Base2 MAU, Termination

Switches for 10Base2 MAU

The default settings are identified below:

❏Termination disabled (1, switch UP)

❏HBE disabled

(1, switch UP)

Termination

The Mini 10Base2 MAU has a built-in 50ohm termination resistor. This is useful if the user does not have a terminator. If enabled the switch is in the “Down” (0) position and the 50 ohm termination is connected across the BNC.

HBE

The HBE can be disabled on the Mini 10Base2 MAU by setting the DIP switch to the “UP” (1) position. This is the default setting.

Mini MAU Page 20