Eagle Electronics 320, 320DF Depth Range Manual, FasTrack, To switch to Manual Depth Range

At left, Sonar Page menu with Depth Range command selected. At

right, the Depth Range Control Scale.

2.The Depth Range Control Scale appears. Press ↑ or ↓ to select a dif- ferent depth range. A black bar highlights the selected range. Range numbers in gray cannot be selected.

3.When the new range is selected, press EXIT to clear the menu.

Depth Range - Manual

You have complete control over the range when the unit is in the man- ual mode. There are 16 depth ranges, from 5 feet to 4,000 feet.

To switch to Manual Depth Range:

1.First, turn off automatic depth range. From the Sonar Page, press

MENU↓ to AUTO DEPTH RANGEENT.

2.Press ↑ to DEPTH RANGEENT and the Depth Range Control Scale ap- pears.

3.Press ↓ or ↑ to select a different depth range. A horizontal black bar highlights the selected range.

4.When the new range is selected, press EXIT to clear the menu.

To turn Auto Depth Range on again:

From the Sonar Page, press MENU↓ to AUTO DEPTH RANGEENTEXIT.

NOTE:

The sonar's depth capability depends on the transducer installa- tion, water and bottom conditions, and other factors.

FasTrack

This feature automatically converts all echoes to short horizontal lines on the display's far right side. The graph on the rest of the screen con- tinues to operate normally. FasTrack gives you a rapid update of condi- tions directly under the boat. This makes it useful for ice fishing, or when you're fishing at anchor. When the boat is not moving, fish sig- nals are long, drawn out lines on a normal chart display. FasTrack con- verts the graph to a vertical bar graph that, with practice, makes a use- ful addition to fishing at a stationary location.

61