Eagle Electronics 320, 320DF manual Trails, Delete a Trail

Figure 1. Figure 2.

Figure 3. Figure 4.

Navigating along a route: Fig. 1 shows the Navigation Page at the start of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm has been triggered and the bearing arrow on the compass rose has turned to point toward Wpt 2, off to the east. In Fig. 3 the traveler has turned east on his new course and is heading straight for Wpt 2, which is 2.87 miles away. Fig. 4 shows route navigation on the Map Page. In this figure, the traveler has reached Wpt 2 and is half-way along the leg between Wpts 2 and 3.

Trails

Delete a Trail

This is the command used to erase or delete a trail: Press MENUMENU↓ to MY TRAILSENT↓ to trail nameENT→ to

DELETE TRAILENT← to YESENT.

Tip:

You can also delete all trails at once:

1.Press MENUMENU↓ to MY TRAILSENT.

2.Press → to DELETE ALLENT← to YESENT.

Edit a Trail Name

To edit a trail name: press MENUMENU↓ to MY TRAILSENT↓ to trail nameENTENT. Press ↑ or↓ to change the first character, then press

→to the next character and repeat until the name is correct. Press ENT then EXITEXITEXITEXIT to return to the previous page display.

129