Eagle Electronics 320, 320DF manual Set Man Overboard MOB Waypoint, Navigate Back to MOB Waypoint

and repeat until the name is correct, then press ENT to jump to the list below.)

3.If the list is short, you can jump directly to the FIND IN LIST box by pressing ENT. Use ↑ or ↓ to select the waypoint name, press ENT and the waypoint information screen appears with the GO TO command se- lected.

4.To begin navigating to the waypoint, press ENT.

	Waypoint
Course line
(dotted)
Off course	Trail line
range, set at
	(solid)
0.20 mile
	Destination
	name

Navigation Page, navigating toward waypoint 004 and leaving a trail.

Set Man Overboard (MOB) Waypoint

One of boating's most terrifying events is having a friend or family member fall overboard. This situation can be deadly on any body of wa- ter — fresh or salt. It's particularly dangerous at night or if you're out of sight of land. Of course, the first thing to do is remain calm and then use all standard safety procedures to rescue the person.

This unit has a man overboard feature that shows navigation data to the location where the feature was activated. To activate it, press the ZOUT and ZIN keys at the same time. Your position at the time these keys are pressed is used as the man overboard position.

Caution:

Saving a new "Man Overboard" waypoint will overwrite and erase the previous "Man Overboard" waypoint.

Navigate Back to MOB Waypoint

Find your way back to the accident position with the Navigation Page or Map Page. When MOB is activated, the Navigation Page automati- cally shows the compass rose with its bearing arrow pointing toward

110