Eagle Electronics 320, 320DF manual Depth Cursor, Depth Range Automatic, Depth box

Cursor line

1.From the Sonar Page, press MENU↓ to CHART SPEEDENT.

2.The Chart Speed Control Bar appears. Press ↓ to decrease chart speed; press ↑ to increase chart speed.

3.When it's set at the desired level, press EXIT.

Depth Cursor

The depth cursor consists of a horizontal line with a digital depth box on the right side. The numbers inside the box show the depth of the cursor.

Depth box

At left, Sonar Page menu with Depth Cursor command selected. At right, sonar chart with the depth cursor active. The line indicates the large fish is 34.64 feet deep.

The cursor can be moved to any location on the screen, letting you pin- point the depth of a target.

1.From the Sonar Page, press MENU↓ to DEPTH CURSORENT.

2.The depth cursor appears. Press ↓ to lower the cursor line; press ↑ to raise the cursor line.

3.To clear the depth cursor, press EXIT.

Depth Range - Automatic

When turned on for the first time, the bottom signal is automatically placed in the lower half of the screen. This is called Auto Ranging and is part of the automatic function. However, depending upon the bottom depth and the current range, you can change the range to a different depth. To do this:

1. From the Sonar Page, press MENU↓ to DEPTH RANGEENT.

60