Step 2: The following configuration window will appear.
Step 3: Set Multilink Usage parameters. This determines how the device utilizes the two B channels for your Internet connection. Available options are:
One B Channel Only:
Two B Channels Only When Needed:
Always two B Channels:
Step 4: Select Data Service. Available options are Data Over Voice Channel, 64K , 56K , and Auto. Recommended selection is Auto.
Step 5: Enter Remote Sub Address Number if necessary.
Step 6: Select STAC compression option.
Step 7: Set Idle Timeout number. The range is from 0 to 3600 seconds.
Step 8: Select Advice of Charge Support option and enter the Unit Price and Currency in the corresponding blanks if the selection is Yes.
Step 9: Click OK to return to the main configuration screen and skip to next step. Otherwise click Alternative Number if there is one or more alternative remote phone numbers. Enter the alternative remote phone number in the corresponding blanks. Then press OK to return to the previous screen. Again press OK to back to main configuration screen.
Step 10: Click Apply and Test
18