Atlantis Land A02-RI_M02 manual Remote Account Name Remote Account Password

Page 29

Step 5: Enter the following information:

Profile Name: a name associated with this profile.

Call Direction: if the remote site will be dialing in, select Incoming. If the MISTRAL LAN ROUTER ISDN will dial out to the remote site, select Outgoing. Select Both if either side can initiate the connection. The default setting is Both.

Call Back: if Call Back is enabled (Yes is selected), it checks the Remote System Name and Remote Password. If a call is received and authentication succeeds, it disconnects the incoming call, and calls the number in the Call Back field. If Call Back is not enabled (No), the Call Back Number field will not display. If the Call Direction is Outgoing only, Call Back options will not display.

Remote Phone Number:

My Account Name:

Make sure the remote site is configured with the same values you specify in My Account Name and My Account Password.

My Account Password:

Remote Account Name:

Remote Account Password:

Step 6: If you selected Outgoing or Both as your Call Direction, click APPLY and TEST, or select ADVANCED for more options. You must still click Apply and Test even if the other end of the connection has not been configured. In this case the test will fail, but that can be considered normal.

27

Image 29

Contents With 4 Fast Ethernet ports + BroadBand Interface Mistral Lan Router IsdnTable of Contents Introduction An overview of Mistral Lan Router Isdn Package contentsMistral Lan Router Isdn Features Page This Router Device Application Front LEDs Using Mistral Lan Router IsdnCabling Rear portsPage Configuring PC in Windows 95/98/ME ConfigurationBefore Configuration Page Configuring PC in Windows NT4.0 Configuring PC in Windows Using Different Browsers for Mistral Lan Router Isdn Configuring with GUI programPassword Netscape NavigatorCustomize User Interface Internet Access with Advanced Configuration Basic Internet Access Configuration via EwanAccess to/from Remote Site e.g., Branch Office Dial-in Access for Off-Site UsersClick Ewan in the Configuration Menu Page Test Select I use Internet Access over Isdn and then click Next Basic Internet Access Configuration via IsdnClick Advanced Internet Access with Advanced ConfigurationClick Apply and Test Set Idle Timeout number. The range is from 0 to 3600 seconds Set the following parameters IP Configuration for Internet AccessIP Routing Table Click Apply IP Address Translation ConfigurationClick Apply Delete a Set of IP Address Translation Add or Edit IP Address TranslationAdd or Edit a Set of static private IP address Static Dhcp ConfigurationDelete a Set of static private IP address Click EditClick Delete Remote Office Access by Isdn Remote ConfigurationRemote Account Name Remote Account Password Advanced Options for Remote Office Access Profiles Select Connection Profiles in the Menu Window Deleting Remote Office Access ProfileConfiguring a Dial-in User Profile Dial-in User Access ConfigurationSelect Connection Profiles from the Menu Window Deleting Dial-in User ProfilesPacket Filtering Then IP Filtering Configuration window will appear Page Management How to View the Connection LogHow to Upgrade the Firmware Current Password New Password How to ResetHow to Change the Mistral LAN Router Isdn Manager Password Confirm Password Click Submit What if I Forget the Password?What is NAT? TroubleshootingHow do I set up the Idle Time? How many rules can be used in IP Filtering function?What’s Data over Voice Channel? Why does the configuration lost from previous usage?Why can’t I use ICQ software under the device? Solution Why can’t I set up IP Filter function in GUI?Why can’t I connect successfully while I use Remote Dial-in? How can I get into Router what if I forgot the password?Support Support