4.2 Advanced Options for Remote Office Access Profiles
If you press the Advanced button from the above Connection Profile Configuration, the following screen appears.
Step 1: Set any of the following parameters:
Data Service: choose 64K, 56K, or Auto. Select Auto unless you know the speed required by the other end of the connection requiring either 64K or 56K.
Remote Sub-Address:
Caller ID Authentication: select Yes if you want to check the caller ID before accepting the call. This service may require a special agreement with your ISDN service provider.
Caller ID Number:
STAC Compression: allows outgoing data to be compressed to achieve higher throughput, and compressed incoming data to be recognized. The ability to use compression depends on the capabilities of the ISP.
Idle Timeout: the number of seconds of inactivity over the connection. When this value is reached, it will disconnect the call. You can set the idle timeout from 0 to 3600 seconds. The default setting is 120 seconds. If you select 0, the connection never times out.
Enable IP:
IP RIP:
Remote IP Address:
Remote IP Netmask:
Enable Bridging:
Step 2: If advanced configuration is required for the operation on the ISDN, and its load sharing
28