How can I get into Router what if I forgot the password?
Answer. If you forget the password, you can clean the password first, but all configuration will be disappeared once the password cleaned.
Solution.
1.To get into Hyper Terminal first.
2.Make sure baud rate is 19200,n, 8,1,none
3.Turn off MISTRAL LAN ROUTER ISDN , and connect the Console Port Cable.
4.Turn on MISTRAL LAN ROUTER ISDN .
5.Press Ctrl +C while the message “Loading Firmware” shows up.
6.Then it will show “Clearing System Configuration” once the system is ready.
7.Therefore, it will recover the default password while the router reboot automatically.
Why does MISTRAL LAN ROUTER ISDN connect with ISP sometimes automatically?
Answer. MISTRAL LAN ROUTER ISDN will build up connected function once LAN’s PC has any packet need to send. This function calls Dial on Demand.
Why didn’t MISTRAL LAN ROUTER ISDN offline automatically even my Idle Time exceeded?
Answer. There are several reasons for
1.The setting Idle time is greater than the confirmed connection packet from ISP.
2.If there is any packet flow into the LAN, Idle Time will always recalculated.
3.LAN’s PC is running Program for the Network, And Program send the packet to the Internet. You could use the window in Show Profile Status to monitor the packet quantity in Network.
Why can’t I connect successfully while I use Remote Dial-in?
Answer. Please be sure both Remote User’s Username and password are correct, and keep the setting information identically at two sides of Router. The best way is setting the MISTRAL LAN ROUTER ISDN in MultiPPP.
41