Atlantis Land A02-RA ME01 manual Storm Adsl Router Application

Page 10

Atlantis Land I-STORM ADSL ROUTER

1.4I-STORM ADSL ROUTER Application

A)Connect WAN port (LINE) to the phone line by RJ11 cable (into packing)

B)L’I-Storm Router ADSL can be connect, by RJ45 port (LAN), like instructions:

1.Directly to the PC, by CAT 5 crossover cable (into packing).

2.To Hub/Switch into UPLINK port by CAT 5 crossover cable (into packing).

3.To Hub/Switch by CAT 5 cable.

C)Connect AC-DC power adapter (2.6A, 5V) to the electric line and to POWER port on back pannel.

D)It’s possibile to connect I-Storm Router ADSL to a PC by RS232 cable (into packing) for configuration.

4

Image 10
Contents Storm Adsl Router With Firewall Built-in Page Copyright Table of Content Atlantis Land I-STORM Adsl RouterIntroduction RoubleshootingPage Introduction An Overview of I-STORM Adsl RouterPackage Contents Storm Adsl Router FeaturesIntroduction Storm Adsl Router Application Using I-STORM Adsl Router Front LEDsRear Ports CablingConfiguration Before ConfigurationConfiguring PC in Windows 95/98/ME Configuring PC in Windows NT4.0 ConfigurationConfiguring PC in Windows Configuration Configuring PC in Windows XP Configuration Web Configurator Password Blank Factory Default SettingsDevice IP Network settings in LAN site IP Address Password Router/Bridge ModeLAN and WAN Port Addresses PPPoE Configuring with Web Browser in Router ModeInformation from ISP PPTP-to-PPPoA1 LAN IP Address Dhcp Server2 WAN ISPAuthentication Protocol Default at Auto Atlantis Land I-STORM Adsl Router PPPoEConfiguration PPPoA Atlantis Land I-STORM Adsl Router RFC1483 Configuration IPoA PPTP-to-PPPoA RelayingDNS Password SystemUpgrade Time ZoneFactory Setting RebootFirewall Packet FilterConfiguration Block Hacker Attack Block WAN Request/URL Filter 5 VPN Virtual Server Remote Config AdvancedDynamic Routing Static RoutingRouter/Bridge Mode Status System StatusDevice Info System LogsSecurity Logs Dhcp TableConfiguring with Web Browser in Bridge Mode Help/ Logout1 LAN 2 WAN System Upgrade Factory Setting Advanced Status Device Info Changing Password HelpFirmware Upgrade Problems with the LAN Interface Problems Starting Up the I-STORM Adsl RouterProblems with the WAN Interface Problem Corrective ActionProblems Connecting to a Remote Node or ISP Power Consumption LED IndicatorsInput Power Physical DimensionProduct Support