Atlantis Land A02-RA ME01 manual Atlantis Land I-STORM Adsl Router PPPoE

Page 26

Atlantis Land I-STORM ADSL ROUTER

PPPoE

PPPoE (PPP over Ethernet) is known as a dial-up DSL or cable service. It is designed to integrate the broadband services into the current widely deployed, easy-to-use, and low-cost dial-up-access networking infrastructure. Therefore, users can get greater access speed without changing the operation concept, sharing the same ISP account and paying for one access account. No PPPoE client software is required for local computer if you select this configuration.

NAT: The NAT feature allows multiple users to access Internet through a single IP account, sharing the single IP address from ISP. If users in the LAN site have public IP addresses and can access Internet directly, the NAT function can be disabled.

Username: Enter the username provided by your ISP. Maximum input is 63 alphanumeric characters (case sensitive).

Password: Enter the password provided by your ISP. Maximum input is 63 alphanumeric characters (case sensitive).

Service Name: This item is for identification purpose. If it is required, your ISP will provide you the information. Maximum input is 63 alphanumeric characters.

Authentication Protocol: Default at “AUTO”.

~Always On: Check this radio button if you want to establish a PPPoE session when starting up. It will also automatically re-establish the PPPoE session when disconnected by ISP.

~Connect on Demand: Check this radio button if you want to establish a PPPoE session only when there is a packet requesting for going out to the Internet.

Auto-disconnect if idle for more than minutes: Auto-disconnect the I-STORM ADSL ROUTER

when there is no activity on the line for a predetermined period of time. You can input any number from 0 to 999. The default value is 5 minutes.

20

Image 26
Contents Storm Adsl Router With Firewall Built-in Page Copyright Table of Content Atlantis Land I-STORM Adsl RouterIntroduction RoubleshootingPage Introduction An Overview of I-STORM Adsl RouterPackage Contents Storm Adsl Router FeaturesIntroduction Storm Adsl Router Application Using I-STORM Adsl Router Front LEDsRear Ports CablingConfiguration Before ConfigurationConfiguring PC in Windows 95/98/ME Configuring PC in Windows NT4.0 ConfigurationConfiguring PC in Windows Configuration Configuring PC in Windows XP Configuration Device IP Network settings in LAN site IP Address Factory Default SettingsWeb Configurator Password Blank LAN and WAN Port Addresses Router/Bridge ModePassword PPPoE Configuring with Web Browser in Router ModeInformation from ISP PPTP-to-PPPoA1 LAN IP Address Dhcp Server2 WAN ISPAuthentication Protocol Default at Auto Atlantis Land I-STORM Adsl Router PPPoEConfiguration PPPoA Atlantis Land I-STORM Adsl Router RFC1483 Configuration IPoA PPTP-to-PPPoA RelayingDNS Password SystemUpgrade Time ZoneFactory Setting RebootFirewall Packet FilterConfiguration Block Hacker Attack Block WAN Request/URL Filter 5 VPN Virtual Server Remote Config AdvancedDynamic Routing Static RoutingRouter/Bridge Mode Status System StatusDevice Info System LogsSecurity Logs Dhcp TableConfiguring with Web Browser in Bridge Mode Help/ Logout1 LAN 2 WAN System Upgrade Factory Setting Advanced Status Device Info Changing Password HelpFirmware Upgrade Problems with the LAN Interface Problems Starting Up the I-STORM Adsl RouterProblems with the WAN Interface Problem Corrective ActionProblems Connecting to a Remote Node or ISP Power Consumption LED IndicatorsInput Power Physical DimensionProduct Support