Atlantis Land A02-RA ME01 manual 2 WAN

Page 48

Atlantis Land I-STORM ADSL ROUTER

3.5.2 WAN

The screen below contains settings for the WAN interface toward Internet.

Protocol: There are two ways ─ RFC1483 and PPTP-to-PPPoA Relaying ─ for the device to have a public IP address. You have to check with your ISP about which way is adopted.

VPI/VCI: Consult the telephone company to get the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) numbers. The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535. The default value VPI is 0 and VCI is 32.

Encapsulation Method: Be sure to use the encapsulation method (LLC/SNAP or VC MUX) required by your ISP.

42

Image 48

Contents Storm Adsl Router With Firewall Built-in Page Copyright Table of Content Atlantis Land I-STORM Adsl RouterIntroduction RoubleshootingPage Introduction An Overview of I-STORM Adsl RouterPackage Contents Storm Adsl Router FeaturesIntroduction Storm Adsl Router Application Using I-STORM Adsl Router Front LEDsRear Ports CablingConfiguration Before ConfigurationConfiguring PC in Windows 95/98/ME Configuring PC in Windows NT4.0 ConfigurationConfiguring PC in Windows Configuration Configuring PC in Windows XP Configuration Factory Default Settings Web Configurator Password BlankDevice IP Network settings in LAN site IP Address Router/Bridge Mode PasswordLAN and WAN Port Addresses Configuring with Web Browser in Router Mode Information from ISPPPPoE PPTP-to-PPPoA1 LAN IP Address Dhcp Server2 WAN ISPAuthentication Protocol Default at Auto Atlantis Land I-STORM Adsl Router PPPoEConfiguration PPPoA Atlantis Land I-STORM Adsl Router RFC1483 Configuration IPoA PPTP-to-PPPoA RelayingDNS Password SystemUpgrade Time ZoneFactory Setting RebootFirewall Packet FilterConfiguration Block Hacker Attack Block WAN Request/URL Filter 5 VPN Virtual Server Remote Config AdvancedDynamic Routing Static RoutingRouter/Bridge Mode Status System StatusDevice Info System LogsSecurity Logs Dhcp TableConfiguring with Web Browser in Bridge Mode Help/ Logout1 LAN 2 WAN System Upgrade Factory Setting Advanced Status Device Info Changing Password HelpFirmware Upgrade Problems Starting Up the I-STORM Adsl Router Problems with the WAN InterfaceProblems with the LAN Interface Problem Corrective ActionProblems Connecting to a Remote Node or ISP LED Indicators Input PowerPower Consumption Physical DimensionProduct Support