Atlantis Land A02-RA ME01 manual Advanced, Remote Config

Page 40

Atlantis Land I-STORM ADSL ROUTER

3.4.7 Advanced

Remote Config

Check “Enable” if you want to configure your I-STORM ADSL ROUTER from any PC in the Internet world with a web browser.

To configure this router remotely, use the URL ”http://WAN IP address:33659” where WAN IP address is the IP address of the router’s WAN port. You can find the value in the System Status. “33659” is the default port number; please use your own port if you change the default value.

If the NAT function is disabled, the URL should be “http://LAN IP address” where LAN IP address is the IP address of the router’s LAN port. You can find the value in the System Status.

34

Image 40

Contents Storm Adsl Router With Firewall Built-in Page Copyright Table of Content Atlantis Land I-STORM Adsl RouterIntroduction RoubleshootingPage Introduction An Overview of I-STORM Adsl RouterPackage Contents Storm Adsl Router FeaturesIntroduction Storm Adsl Router Application Using I-STORM Adsl Router Front LEDsRear Ports CablingConfiguration Before ConfigurationConfiguring PC in Windows 95/98/ME Configuring PC in Windows NT4.0 ConfigurationConfiguring PC in Windows Configuration Configuring PC in Windows XP Configuration Web Configurator Password Blank Factory Default SettingsDevice IP Network settings in LAN site IP Address Password Router/Bridge ModeLAN and WAN Port Addresses Configuring with Web Browser in Router Mode Information from ISPPPPoE PPTP-to-PPPoA1 LAN IP Address Dhcp Server2 WAN ISPAuthentication Protocol Default at Auto Atlantis Land I-STORM Adsl Router PPPoEConfiguration PPPoA Atlantis Land I-STORM Adsl Router RFC1483 Configuration IPoA PPTP-to-PPPoA RelayingDNS Password SystemUpgrade Time ZoneFactory Setting RebootFirewall Packet FilterConfiguration Block Hacker Attack Block WAN Request/URL Filter 5 VPN Virtual Server Remote Config AdvancedDynamic Routing Static RoutingRouter/Bridge Mode Status System StatusDevice Info System LogsSecurity Logs Dhcp TableConfiguring with Web Browser in Bridge Mode Help/ Logout1 LAN 2 WAN System Upgrade Factory Setting Advanced Status Device Info Changing Password HelpFirmware Upgrade Problems Starting Up the I-STORM Adsl Router Problems with the WAN InterfaceProblems with the LAN Interface Problem Corrective ActionProblems Connecting to a Remote Node or ISP LED Indicators Input PowerPower Consumption Physical DimensionProduct Support