Click Apply.
The identification information is edited. Click Refresh to view updated information.
Page 3-11
5
Type the new information.
▲ Important: A maximum of 254 characters (including spaces) is allowed.
4
Click once in the field to be edited.
For a description of each field, see “Identify “ on page 4-3.
▲ Important: Only those fields that are colored white or that contain drop-down menus can be edited.
3
Configuring Device Identification Information
Configuring Device Identification Information
To help with hub identification, you can add certain hub details; such as, the hub stack’s physical address, name, location, and contact infor- mation.
To configure device identification information:
1 Do not select any item on the Device Page’s front panel image. (This selects the entire hub stack.)
2 Click Identify.
The Device Identification table appears, similar to Figure 3-10.
Figure 3-10 Device Identification table