Asante Technologies 1000 user manual Identify

Menus

Identify

This menu allows you to view and configure identification information for the SuperStack II Switch 1000.

Table 6-4 describes each field in the Identify menu.

ΔNote: For instructions on using this menu, see “Config- uring Identification Information” on page 4-6.

	Table 6-4 Identify Menu
Field	Description
Physical Address	Read-only field; displays the device’s hardware
	address.
Object ID	Read-only field; displays the device’s SNMP identify-
	ing number.
Description	Read-only field; displays a description of the device.
Name	Configurable field; assigns a name to the device.
	Note: A maximum of 254 characters, including
	spaces, is allowed.
Location	Configurable field; assigns a physical location to the
	device.
	Note: A maximum of 254 characters, including
	spaces, is allowed.
Contact	Configurable field; assigns a name of the person
	responsible for the device.
	Note: A maximum of 254 characters, including
	spaces, is allowed.
Up Time	Read-only field; displays the amount of time the
	device has been operational since the last time it was
	off-line.
Interfaces	Read-only field; displays the number of network inter-
	faces present on the device.

Page 6-6