Asante Technologies 1000 Trap Receivers, Field Description Trap index, Receiver Address, Category

Trap Receivers

Trap Receivers

This menu allows you to determine the management stations that will receive traps from the SuperStack II Switch 1000.

▲Important: Refer to the SuperStack II Switch 1000’s User Guide for instructions on setting traps.

ΔNote: For instructions on using this menu, see “Managing Trap Receivers” on page 4-12.

Table 6-10 describes each field in the Trap Receivers menu.

	Table 6-10 Trap Receivers Menu
Field	Description
Trap index	Read-only field; displays the number of the trap
	receiver entry.
Status	Configurable field; displays the status of the trap
	receiving station’s entry.
	❏ active — trap receiving station’s entry is
	active.
	❏ notInService — trap receiving station’s entry is
	not active (deletes the trap receiving station
	when selected).
	Note: Refer to the SuperStack II Switch 1000’s MIB for
	information on the other options available in this field.
Receiver Address	Configurable field; displays the IP address of the man-
	agement station that can receive traps.
Community String	Configurable field; displays the write community
	string of the receiving management station.
Category	Configurable field; determines which traps are to be
	received by the trap receiving station.
	▲ Important: This is a 32-bit mask field.
	❏ FF:FF:FF:FF — enables all traps
	❏ ‘00000001’h — high priority configuration
	traps.
	❏ ‘00000002’h — low priority configuration traps
	❏ ‘00000004’h — high priority security traps
	❏ ‘00000008’h — low priority security traps
	❏ ‘00000010’h — alarms and polling traps

Page 6-15