Asante Technologies 1000 user manual Accessing the Device

Accessing the Device

❏Type the highest (last) IP address on your network in the Hi IP Address field.

❏Select New in the Discovery Mode field to create a new map, or select Append to attach this map to the map that is stored in your system’s buffer (if any).

5 Click Apply.

IntraSpection “discovers” and builds a map of your net- work. The map contains icons which represent each SNMP device on the network. Figure 3-1 is an example map.

Figure 3-1 Discovered network map

6 Click once on the SuperStack II Switch 1000’s device icon.

ΔNote: The SuperStack II Switch 1000’s device icon is labeled “3Com” and has the device’s IP address directly below it.

The Device Page for the selected SuperStack II Switch 1000 appears (see Figure 3-2 on page 3-3).

For information on the Device Page’s components, see “Device Page Components” on page 3-3.

For information on performing basic management func- tions, see “Performing Basic Management Functions” on page 4-1.

Page 3-2