Asante Technologies IC3624PWR user manual Snmp Management Configuration

34

6.2.3.1 SNMP Management Configuration

The SNMP Configuration screen lists all SNMP managers and associated information. There are two default community strings, private and public. Read-only is allowed with public mode and read-write is allowed in private mode. You can change the community strings to meet your network requirements.

Map: Main Menu->Basic Configuration Menu->SNMP Configuration->SNMP Management Configuration

The following table describes the four commands used to set the Manager IP, Community string, Status and Privilege.

Set Manager Status:	Enable or disable a community string.
Set Manager Privilege:	Set the access privilege, 1 is Read-only and 2 is Read-Write.
Set Manager IP:	Set the IP address of a specified community. The access is restricted to specified IP
	only.

Set Manager Community:

Set community string.

IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit