40
There are four commands on this menu. The example below is from the GUI interface.
Map: Main Menu->Basic Configuration Menu->SNTP Configuration
Set SNTP Server IP | Use to set Simple Network Time Protocol, enter SNTP server IP to get into it |
|
|
Set SNTP Interval | Use to set up SNTP polling interval, for example 1min |
|
|
Set Time Zone | Use to set the time zone Pacific |
|
|
Set Daylight Saving | Use to set up the daylight saving |
|
|
6.2.8 ARP Table
Use this sub command to set the Address Resolution Protocol (ARP) table timeout, add or modify a static entry and establish the sorting method.