Modem Setup
2Insert the im240 Wireless Modem Installation and Application Software CD in your
•If the im240 Wireless Modem and Installation and Application Software installation program does not start automatically, select Start, Run, and then type d:\setup.exe, where d refers to the letter of your
3Use the Next and Back buttons to navigate through the Wizard.
Using the default settings for the Destination Location and Program Folder is recommended unless you have special requirements and an advanced understanding of PC configuration.
4When prompted, choose Laptop as your installation platform.
5If the Software Installation window appears, you can safely ignore the warning. Click Continue Anyway, each time it appears.
6When prompted, insert your wireless modem into the available PCMCIA Type II slot. Click Ok.
Note: For Windows XP only
•For Windows XP SP2 only, you will have a wizard which wants to know if Windows can connect to Windows update to search for software Select “No, not this time” and click Next.
•When the “Found New Hardware Wizard” window displays, Select the “Install the software automatically” Recommended box, and click Next.
•On the next Wizard window highlight the “Motorola im240 PC Card modem” and click next.
•When the Wizard has finished you will get a window which states that “The wizard has finished installing the software for the Motorola im240 PC Card modem”, Click on the Finish button.
7Upon completion of the installation, You will be instructed to remove the modem from the laptop. Do so then click on the OK button.
8You will be instructed to insert the modem into the laptop. Do so and then click on the OK button.
9When prompted, restart Windows.
Installing on Windows NT
Use these instructions if you are installing on to a laptop running Windows NT.
1Turn on your laptop.
8