Inserting and Removing a SIM Card
SIM Card
Inserting and Removing a SIM Card
To insert the SIM card:
1Turn the unit over, so that the antenna ferrule is at the upper right corner.
2Gently insert the SIM card with the gold contacts facing down and with the clipped corner positioned in the lower left hand corner of the card.
3Gently push the SIM card in until it stops moving.
To remove the SIM card:
1Remove the im240 Wireless Modem from your laptop or Pocket PC and turn it over, so that the antenna is at the upper right corner.
2Place a finger on the SIM card and slide the SIM card out.
3When the SIM card pops out, gently hold the two sides with your fingers and take out the SIM card.
After installing the im240 Dashboard software:
Note: The following features can be accessed after the installation of the Dashboard application.
When you insert the wireless modem into your laptop or Pocket PC, you may be prompted to enter a SIM PIN, if it is enabled.
If your wireless modem is set to prompt you to enter a SIM PIN, your default SIM PIN is 0000. It is recommended that you change your SIM PIN to prevent fraudulent use of the SIM card.
If your wireless modem is not set to prompt you to enter a SIM PIN, it is recommended that you enable the SIM PIN security feature to prevent fraudulent use of the SIM card. Disabling your SIM PIN allows anyone to use your wireless modem.
3